 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step. Features * * * * Full Integration: VCO, PLL, Loop Filter Wide Bandwidth (> 2GHz) Fast Switching (=< 50s) Low noise: Typ -110 dBc/Hz @ 100kHz offset MASY-008215-243000 V2 Description This synthesiser is designed for demanding wide bandwidth applications. The fully integrated design incorporates a VCO, PLL and loop filter in a convenient surface mount package. The lid is fully solder attached to provide optimum electrical shielding. Programming is via 3 Wire SPI (Serial Peripheral Interface.) Actual product finish may vary from illustration Electrical Specification (Applies over the frequency range @ +25 C, output and input load impedance of 50 ohms. Unless otherwise stated limits & conditions are indicated values.) Parameter Frequency Step Size RF Output power Output Return Loss Settling Time Output Harmonic Spurious Phase Noise (Noise <1kHz offset dependent upon external reference) External Ref 2.0 Lock Monitor 0 V PLL DC Supply voltage V PLL DC Current V VCO DC Supply voltage V VCO DC Current +9.75 +23.75 0.1 +24 10 +10 100 0.8 +24.25 15 +10.25 150 Volt Volt mA Volt mA V cc = +10 V V cc = +24V In Lock 0 Min 3.15 Typ 4.35 2.5 +3 12 50 -20 -63 -90 -85 -110 100 2.5 3.3 -15 -60 -75 -75 -100 +6 Max 5.55 Units GHz MHz dBm dB s dBc dBc dBc/Hz dBc/Hz dBc/Hz MHz Volt Offset 1kHz Offset 10kHz Offset 100kHz See Note 2. Out of Lock To within 10kHz Condition Over TOP - See Note 1. Note 1: TOP = -40C ~ +85C Case operating temperature Note 2: External Reference, 0dBm min input power, with stability of 20 ppm (max) over temperature. Reference phase noise: -98 dBc/Hz @ 10 Hz, -110 dBc/Hz @ 100 Hz, -120 dBc/Hz @ 1 kHz Note 3: Programming 3 Wire SPI (Serial Peripheral Interface) - contact factory for details. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step. Pin Assignment Pin Number 2 8 10 12 16 18 20 21 25 All other pins Assignment RF_Out Clock Data LE (Load Enable) LD (Lock Detect) +10V V CC +24V V CC NC (No Connection) REF_IN (Reference Input) GND MASY-008215-243000 V2 Mechanical 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. Synthesiser, SMT, 3.15 - 5.55 GHz, 2.5 MHz step. Environmental Parameter Case Operating Temperature (TOP ) Storage Temperature Min -40 -45 Max +85 +120 Units C C MASY-008215-243000 V2 Typical Performance Plots Phase noise at centre frequency 4.35GHz. Frequency Spectrum at centre frequency 4.35GHz. Demonstration Board To enable early system integration and performance verification, this part is available on a demonstration board (pictured.) The demonstration board comes with test results for the on-board unit, with programming software, control cable (PC Printer port) and instructions. For more information about this demonstration system, please contact factory for details. Actual product finish may vary from illustration 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MASY-008215-243000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |